Precautions
Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause
damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may
result in hazardous radiation exposure.
•
Do not point camera at any source of bright light. If the object contain very bright areas, bright vertical or horizontal
lines may appear on the screen. This is called smear, a phenomenon, which often occurs with solid-state pickups,
and is not a malfunction.
"
"
•
Bright lights may cause bleaching of the sensor's color filters. This will be visible as colored spots in the picture and is
irreversible.
���
Operating
���
In case of abnormal operation
���
Storage location
���
Object and Liquid Entry
���
Replacement Parts
���
Avoid bright lights in the field of view of the camera
���
Controls adjustment
• Before using, make sure power supply and others are properly connected.
•
If the unit emits smoke or an unusual smell.
•
If the power supply cord or plug is damaged.
•
If exposure to moisture, water, and/or inclement weather(rain, snow, etc.).
•
If unit exhibits a distinct change in performance.
•
If unit does not operate normally when the user correctly follows the operating instructions.
•
If liquid or other foreign objects enter the camera, or
•
If you drop the unit or damage the camera :
(I) Disconnect the cable and the connecting cables.
(II) Contact CISEYE or your authorized CISEYE dealer.
•
While operating, if any abnormal condition or malfunction is observed, stop using the camera immediately and
contact CISEYE or your authorized CISEYE dealer.
Avoid operating or storing the camera in the following locations :
Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled
with liquids, such as vases or cups, on the unit.
When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
•
Extremely hot or cold places(Operating temperature : 0°C to +45°C [32°F to 113°F]).
•
Exposed to direct sunlight for a long time, or close to heating sources such as heaters, stoves, or other equipment
(including amplifiers) that produce heat.
•
Close to sources of strong magnetism.
•
Close to sources of powerful electromagnetic radiation, such as radios or TV transmitters.
•
Locations subject to strong vibration or shock.
•
Close to sources of dusty and moisture.
•
Expose to rain and water, for example near a bathtub, washbowl, sink, laundry basket, in a damp or wet basement,
near a swimming pool, in an unprotected outdoor installation, or in any area classified as a wet Location.
1
NOTICE
5/52
CISEYE
Indoor IP Dome Camera
Users Manual
