Motion Detection Tab
This button activates or stops motion detection. Detection Area setting below must be done in advance.
"
"
This button activates or stops motion detection target area setup mode. If you click this button, you will see the
green grids on the screen. To assign the target area, click the corresponding square on there screen. The color of
the square will be changed. To clear the selection, click again the square. If you exit the setup mode, press this
button again.
These buttons assign counter action of alarm sensor output if motion is detected. For example, if you assign [2]
button and a buzzer is connected to corresponding output relay of alarm module, buzzer will be turned on for a
while when motion is detected at the designated area of interested.
This activates the alert sound function. If you send your own wave file to your video server, it will play back the
wave file though the audio out socket when motion is detected.
This define up the sensitivity of motion detect. Move small box toward the+ direction.
Return to Normal mode i.e. exit from motion detection setup and return to PTZ control tab.
6
5
WEB VIEWER
29/52
CISEYE
Indoor IP Dome Camera
Users Manual
