R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
B-9
Cisco WRP500 Administration Guide
Appendix B Data Fields
Setup
Setup > Mobile Network
Static Routing
Pre-determined pathways that network information travels
to reach a specific host or network.
•
Route Name: A name for the route, including up to
25 alphanumeric characters.
•
Destination LAN IP: The address of the remote
network or host to which you want to assign a static
route.
•
Subnet Mask: The subnet mask for the destination
network.
•
Gateway: The IP address of the gateway device that
allows for contact between the WRP500 and the
remote network or host.
•
Interface: The location of the destination network,
LAN and Wireless (Ethernet and wireless
networks) or the Internet (WAN).
Connect Mode
•
Auto: When this mode is selected, the modem can
establish a connection automatically.
•
Manual: When this mode is selected, a connection
is established manually.
Connect on Demand
When this feature is enabled, the modem can
automatically re-establish a terminated connection
when a user attempts to access the Internet again.
Max. Idle Time
The number of minutes of inactivity that can elapse
before an Internet connection is terminated.
Default: 5 minutes
Keep Alive
When this feature is enabled, the WRP500 periodically
checks the Internet connection. If the connection is
terminated, then the WRP500 automatically
re-establishes the connection.
Card Status
The current modem connection status as Detecting,
Connecting, or Connected.
Configure Mode
•
Auto: When this mode is enabled, the WRP500
automatically detects which card model was
inserted and which carrier is available.
•
Manual: When this mode is enabled, the connection
is established manually.