R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
A-18
Cisco WRP500 Administration Guide
Appendix A Advanced Voice Fields
Regional page
IMPORTANT:
Ring and Call Waiting tones don’t work the same way on all phones. When setting
ring tones, consider the following recommendations:
•
Begin with the default Ring Waveform, Ring Frequency, and Ring Voltage.
•
If your ring cadence doesn’t sound right, or your phone doesn’t ring, change your Ring Waveform,
Ring Frequency, and Ring Voltage to the following:
–
Ring Waveform: Sinusoid
–
Ring Frequency: 25
–
Ring Voltage: 80V
Ring3 Name
Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 3 for the inbound call.
The default is
Bellcore-r3
.
Ring4 Name
Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 4 for the inbound call.
The default is
Bellcore-r4
.
Ring5 Name
Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 5 for the inbound call.
The default is
Bellcore-r5
.
Ring6 Name
Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 6 for the inbound call.
The default is
Bellcore-r6
.
Ring7 Name
Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 7 for the inbound call.
The default is
Bellcore-r7
.
Ring8 Name
Name in an INVITE’s Alert-Info Header to pick distinctive
ring/CWT 8 for the inbound call.
The default is
Bellcore-r8
.