D. Setting Up Your Wireless Devices
Your wireless devices (desktop, laptop, iPad, smart-phone,
etc.) must be configured to work with your wireless router.
Each of these devices must have an internal or external
wireless adapter and applicable drivers. User guides for
each of these devices should have instructions for wireless
set up. You will need the SSID and password you assigned
to this wireless router during router setup. For each wireless
device, access the setup menu, choose the appropriate
SSID from the list of wireless networks, enter your
password, and test the wireless connection.
Quick Installation Guide
Your LTE500 has been pre-configured with an SSID
(wireless network name) and security pass phrase.
See the sticker on the bottom of your router for this
information. If you wish to change these or other
settings, use the following instructions.
Figure 4
300Mbps
Wireless Router
www.readynetsolutions.com
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one
or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This transmitter must not be coÿlocated or operating in conjunction
with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance
20cm between the radiator& your body.
Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
