Review and Guide to setup the New Tenda W150M WiFi 150MBPS Wifibridge
I've been testing the Tenda W150M AP/Router/Wirelessbridge for the last month or so to test its
stability and reliability as found the Vonets
Tenda W150M works as good as any 85MBPS Homeplugs! Its works absolutely superb and is a
doddle to setup!
The Tenda W150M can be purchased from World
satellite.co.uk/Networking-WiFi/Tenda
wifibridge-WIFI-W150M
Its can either be powered by supplied USB lead or supplied 3PIN PSU. This is great for Satellite
receivers such as the Blade BM7000S or the Technomate TM5402HD that only have one USB port,
even better news for receivers like the TM500 Super that dont have any USB ports. This really is the
WiFi Solution for ALL receivers! You
it. Once configured you can easily tuck behind your receiver/
To setup the Tenda W150M follow the guide below:
1.
Power up the W150M using supplied USB lead or PSU.
2.
Press Mode button until AP blue LED is alight.
3.
Connect to PC using supplied
4.
Go to Control Panel > Network Connections > Change Adapter Settings > Right Click over
Network connection > Select Properties. Click on TCP/IP
Review and Guide to setup the New Tenda W150M WiFi 150MBPS Wifibridge
I've been testing the Tenda W150M AP/Router/Wirelessbridge for the last month or so to test its
as found the Vonets VAP11G can be hit and miss. Well I've got to say the
Tenda W150M works as good as any 85MBPS Homeplugs! Its works absolutely superb and is a
Tenda W150M can be purchased from World-of-Satellite.co.uk http://www.world
WiFi/Tenda-150Mbps-Portable-Wireless-Access-Point
Its can either be powered by supplied USB lead or supplied 3PIN PSU. This is great for Satellite
receivers such as the Blade BM7000S or the Technomate TM5402HD that only have one USB port,
even better news for receivers like the TM500 Super that dont have any USB ports. This really is the
WiFi Solution for ALL receivers! You won’t believe how good this WiFi Solution really is until you try
ly tuck behind your receiver/set top box.
To setup the Tenda W150M follow the guide below: -
Power up the W150M using supplied USB lead or PSU.
Press Mode button until AP blue LED is alight.
Connect to PC using supplied Ethernet cable.
rol Panel > Network Connections > Change Adapter Settings > Right Click over
Network connection > Select Properties. Click on TCP/IPv4 > Click Properties.
Review and Guide to setup the New Tenda W150M WiFi 150MBPS Wifibridge
I've been testing the Tenda W150M AP/Router/Wirelessbridge for the last month or so to test its
VAP11G can be hit and miss. Well I've got to say the
Tenda W150M works as good as any 85MBPS Homeplugs! Its works absolutely superb and is a
http://www.world-of-
Point-Router-Wireless-
Its can either be powered by supplied USB lead or supplied 3PIN PSU. This is great for Satellite
receivers such as the Blade BM7000S or the Technomate TM5402HD that only have one USB port,
even better news for receivers like the TM500 Super that dont have any USB ports. This really is the
WiFi Solution really is until you try
rol Panel > Network Connections > Change Adapter Settings > Right Click over
> Click Properties.
