Cisco UCS C890 M5, Инструкция по эксплуатации

Страница: 133 / 191

Contents Page 138
COM2/SOL (Serial-Over-LAN) Console
Redirection (for SOL/COM2)
Select Enabled to use the SOL port for Console Redirection. The options are Enabled and
Disabled.
*If the item above is set to Enabled, the following items will become available for user's
configuration:
Console Redirection Settings (for SOL/COM2)
Use this feature to specify how the host computer will exchange data with the client
computer, which is the remote computer used by the user.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirection. Select
VT100 to use the ASCII Character set. Select VT100+ to add color and function key support.
Select ANSI to use the Extended ASCII Character Set. Select VT-UTF8 to use UTF8 encoding
to map Unicode characters into one or more bytes. The options are ANSI, VT100, VT100+ ,
and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 38400, 57600 and 115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The options are 7
(Bits) and 8 (Bits) .
Parity
A parity bit can be sent along with regular data bits to detect data transmission errors. Select
Even if the parity bit is set to 0, and the number of 1's in data bits is even. Select Odd if the
parity bit is set to 0, and the number of 1's in data bits is odd. Select None if you do not
want to send a parity bit with your data bits in transmission. Select Mark to add a mark as a
parity bit to be sent along with the data bits. Select Space to add a Space as a parity bit to
be sent with your data bits. The options are None , Even, Odd, Mark, and Space.