Cisco UCS C890 M5, Инструкция по эксплуатации

Страница: 103 / 191

108
Contents Page 108
CPU C6 Report (Available when Autonomous Core C-State is set to Disable)
Select Enable to allow the BIOS to report the CPU C6 state (ACPI C3) to the operating system.
During the CPU C6 state, power to all caches is turned off. The options are Auto , Enable,
and Disable.
Enhanced Halt State (C1E) (Available when Autonomous Core C-State is set to
Disable)
Select Enable to enable "Enhanced Halt State" support, which will significantly reduce the
CPU's power consumption by minimizing CPU's clock cycles and reduce voltage during a
"Halt State." The options are Disable and Enable .
Package C State Control (Available when "Power Technology" is set to Custom)
Package C State
Use this feature to set the limit on the C-State package register. The options are C0/C1 state,
C2 state, C6 (non-Retention) state, C6 (Retention) state, No Limit, and Auto .
CPU T State Control Available when "Power Technology" is set to Custom)
Software Controlled T-States
If this feature is set to Enable, CPU throttling settings will be supported by the software of
the system. The options are Enable and Disable.
Chipset Configuration
Warning: Setting the wrong values in the following items may cause the system to
malfunction.
North Bridge
This feature allows the user to configure the settings for the Intel North Bridge.