Cisco UCS C890 M5 Скачать руководство пользователя страница 105

Страница: 105 / 191

110

Contents

Page 110

Degrade Precedence

Use this feature to select the degrading precedence option for Ultra Path Interconnect (UPI)

connections. Select Topology Precedent to degrade UPI features if system options are in

conflict. Select Feature Precedent to degrade UPI topology if system options are in conflict.

The options are

Topology Precedence

and Feature Precedence.

Link L0p Enable

Select Enable to enable Link L0p. The options are Disable, Enable, and

Auto

Link L1 Enable

Select Enable to enable Link L1 (Level 1 link). The options are Disable, Enable, and

Auto

IO Directory Cache (IODC)

Select Enable for the IODC (I/O Directory Cache) to generate snoops instead of generating

memory lockups for remote IIO (InvIToM) and/or WCiLF (Cores). Select Auto for the IODC to

generate snoops (instead of memory lockups) for WCiLF (Cores). The options are Disable,

Auto

, Enable for Remote InvItoM Hybrid Push, InvItoM AllocFlow, Enable for Remote

InvItoM Hybrid AllocNonAlloc, and Enable for Remote InvItoM and Remote WViLF.

SNC

Select Enable to use "Sub NUMA Clustering" (SNC), which supports full SNC (2-cluster)

interleave, and 1-way IMC interleave. Select Auto for 1-cluster or 2-cluster support depending

on the status of IMC (Integrated Memory Controller) Interleaving. The options are

Disable

Enable, and Auto.

XPT Prefetch

Select Enable to support XPT Prefetching to enhance system performance. The options are

Enable,

Disable

, and Auto.

KTI Prefetch

Select Enable to support KTI Prefetching to enhance system performance. The options are

Enable

and Disable.

Local/Remote Threshold

Содержание UCS C890 M5
































































































































































































Результаты поиска

Содержание UCS C890 M5

Отзывы:

Cisco UCS C890 M5, Инструкция по эксплуатации, Страница: 105 / 191

Результаты поиска

Содержание UCS C890 M5

Отзывы: