Cisco UCS C890 M5 Скачать руководство пользователя страница 123

Страница: 123 / 191

128

Contents

Page 128

Configure SATA as (Available when SATA Controller is set to Enable)

Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID to

configure a SATA drive specified by the user as a RAID drive. The options are

AHCI

and RAID.

SATA HDD Unlock (Available when SATA Controller is set to Enable)

Select Enable to unlock SATA HDD password in the OS. The options are

Enable

and Disable.

SATA/sSATA RAID Boot Select (Available when Configure SATA as is set to RAID)

This feature allows the user to decide which controller should be used to boot the system. The

options are None, SATA Controller,

sSATA Controller

, and Both.

Aggressive Link Power Management

When this feature is set to Enable, the SATA AHCI controller manages the power use of the

SATA link. The controller will put the link in a low power mode during an extended period of

I/O inactivity and will return the link to an active state when I/O activity resumes. The options

are Enable and

Disable

SATA RAID Option ROM/UEFI Driver (Available when Configure SATA as is set to

RAID)

Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for system

boot. The options are Disable, EFI, and

Legacy

SATA Port 0 - SATA Port 7

Hot Plug

Select Enable to support Hot plugging for the device installed on a selected SATA port which

will allow the user to replace the device installed in the slot without shutting down the

system. The options are

Enable

and Disable.

Spin Up Device

When this feature is set to Enable, the SATA device installed on the SATA port specified by

the user will start a COMRESET initialization when an edge is detected from 0 to 1. The

options are Enable and

Disable

SATA Device Type

Use this feature to specify if the device installed on the SATA port specified by the user

should be connected to a Solid-State drive or a Hard Disk Drive. The options are

Hard Disk

Drive

and Solid-State Drive.

Содержание UCS C890 M5
































































































































































































Результаты поиска

Содержание UCS C890 M5

Отзывы:

Cisco UCS C890 M5, Инструкция по эксплуатации, Страница: 123 / 191

Результаты поиска

Содержание UCS C890 M5

Отзывы: