Maintaining the NSS
Saving the Current Configuration
Cisco Small Business NSS2000 Series Administration Guide
127
7
Configuration Manager page. After you mount the USB flash device by inserting it
into the AUX-1 port, make sure you unmount the USB flash device before you
remove it. (To unmount the USB flash device, display the Storage Status page and
then click Unmount.)
To display the Configuration Manager page, from the Manager Menu, click Admin
Configuration.
The Configuration Manager page appears.
Saving the Current Configuration
You can save a copy of the NSS configuration that can be used should you need to
restore the settings at a later time. When you save the configuration file, it saves a
date-stamped version of the current configuration settings to the specified volume
on the NSS. You can choose to save the current configuration settings to a
specified volume on the NSS or you can save the file to a USB flash device
inserted into the AUX-1 port.
To save the current configuration:
NOTE:
If you restore a configuration file that
was saved in an older version of the NSS
firmware than the current version, check the
settings after you restore the file to ensure they
were updated correctly.
