Chapter 1 Introducing the Model DPR2320, DPR2325, EPR2320, and EPR2325 Cable Modem Gateways
6
68-4004214-01 Rev D
DPR2325 and EPR2325 Back Panel Components
The following illustration shows the description and function of the back panel
components of the DPR2325 and EPR2325 cable modem gateways.
Important:
Do not connect your PC to
both
the Ethernet and USB ports at the same
time. Your Internet service may not function properly if both the Ethernet and USB
ports are connected to the same PC at the same time.
1
ANTENNA—
Provides a communication connection for the
built-in wireless access point (WAP) to allow wireless devices
to communicate with the cable modem
2
POWER—
Connects the cable modem to the DC output of the
AC power adapter that is provided with your cable modem
CAUTION:
Avoid damage to your equipment. Only use the
AC power adapter that is provided with your cable
modem gateway.
3
RESET—
Activating this switch resets the cable modem
gateway to factory default values and reboots the cable
modem gateway
Note:
This switch is for maintenance purposes only. Do not
use unless directed to do so by your service provider.
4
ETHERNET—
One RJ-45 Ethernet port (on DPR2320 and
EPR2320 modems) or four RJ-45 Ethernet ports (on DPR2325
and EPR2325 modems) connect to the Ethernet port on your
PC or to an Ethernet hub or router on your home network
5
USB—
12 Mbps USB port connects to the USB port on your
PC
6
CABLE—
F-connector connects to an active cable signal from
your service provider
