ix
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Preface
This guide describes how you can configure and maintain Cisco Secure Access Control System
(ACS) 5.1 by using the command-line interface (CLI). Each topic provides a high-level summary of the
tasks required for using the CLI in the Cisco Application Deployment Engine (ADE) OS 1.2 that, in
combination with ACS 5.1, runs on the CSACS-1121 appliance.
This preface includes:
•
Who Should Read This Guide, page ix
•
How to Use This Guide, page ix
•
How This Guide Is Organized, page x
•
Document Conventions, page x
•
Documentation Updates, page xi
•
Related Documentation, page xi
•
Obtaining Documentation and Submitting a Service Request, page xii
Note
Use this guide in conjunction with the documentation listed in
Related Documentation, page xi
.
Who Should Read This Guide
The majority of the instructions in this guide are straightforward; however, a few are complex. Therefore,
only experienced users should use these instructions.
Note
Use this guide in conjunction with the documentation listed in
Related Documentation, page xi
.
How to Use This Guide
Cisco makes the following recommendations for using this document:
•
Read the document in its entirety. Subsequent sections build on information and recommendations
discussed in previous sections.
•
Use this document for all-inclusive information about the ACS appliance.
•
Do not vary the command-line conventions (see
Document Conventions, page x
).