Cisco CSACS-1121-K9, Справочное руководство

Страница: 118 / 190

A-80
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
show ports
To display information about all the processes listening on active ports, use the show ports command in
the EXEC mode.
show ports [|] [|]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Usage Guidelines
When you run the show ports command, the port must have an associated active session.
| Output modifier variables:
•
begin —Matched pattern. Up to 80 alphanumeric characters.
•
count —Count the number of lines in the interface. Add number after the
word count .
|—Output modifier variables (see Table A-12 ).
•
end —End with line that matches. Up to 80 alphanumeric characters.
•
exclude —Exclude lines that match. Up to 80 alphanumeric characters.
•
include —Include lines that match. Up to 80 alphanumeric characters.
•
last —Display last few lines of output. Add number after the word last .
Up to 80 lines to display. Default 10.
|—Output modifier variables (see Table A-12 ).
Table A-12 Output Modifier Variables for Count or Last
| Output modifier variables:
• begin —Matched pattern. Up to 80 alphanumeric characters.
•
count —Count the number of lines in the output. Add number after the
word count .
|—Output modifier variables.
•
end —End with line that matches. Up to 80 alphanumeric characters.
• exclude —Exclude lines that match. Up to 80 alphanumeric characters.
•
include —Include lines that match. Up to 80 alphanumeric characters.
• last —Display last few lines of output. Add number after the word last .
Up to 80 lines to display. Default 10.
|—Output modifier variables.