A-140
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Configuration Commands
Usage Guidelines
Cisco recommends that you use underscores (_) or hyphens (-) between the terms within the
word
string.
If you use spaces between terms within the
word
string, you must enclose the string in quotation marks
(“).
Examples
Example 1
acs/admin(config)#
snmp-server location Building_3/Room_214
acs/admin(config)#
Example 2
acs/admin(config)#
snmp-server location “Building 3/Room 214”
acs/admin(config)#
Related Commands
username
To add a user who can access the CSACS-1121 using SSH, use the
username
command in Configuration
mode. If the user already exists, the password, the privilege level, or both change with this command. To
delete the user from the system, use the
no
form of this command.
username
username
password
{
hash
|
plain
}
password
role
{
admin
|
user
]
[
disabled
[
email-address
]]
[
email-address
]
For an existing user, use the following option:
username
username
password role
{
admin
|
user
}
password
Syntax Description
Defaults
The initial user during setup.
Command Modes
Configuration
Command
Description
snmp-server host
Sends traps to a remote system.
snmp-server community
Sets up the community access string to permit access to SNMP.
snmp-server contact
Configures the SNMP location MIB value on the system.
username
Only one word for the username argument. Blank spaces and quotation marks
(“) are not allowed. Up to 31 alphanumeric characters.
password
password
Password character length up to 40 alphanumeric characters. You must
specify the password for all new users.
hash | plain
Type of password. Up to 34 alphanumeric characters.
role admin | user
Sets the privilege level for the user.
disabled
Disables the user according to the user’s e-mail address.
email-address
The user’s e-mail address. For example,
.
