A-72
CLI Reference Guide for the Cisco Secure Access Control System 5.1
OL-18996-01
Appendix A ACS Command Reference
Show Commands
Defaults
No default behavior or values.
Command Modes
EXEC
Usage Guidelines
Only platforms that have a disk file system support the
show disks
command.
Examples
acs/admin#
show disks
disk: 1% used (48564 of 7063480)
temp. space 2% used (35844 of 2031952)
Internal filesystems:
all internal filesystems have sufficient free space
acs/admin#
Related Commands
show icmp-status
To display file-system information about the disks, use the
show icmp_status
command in EXEC mode.
show icmp_status
{
>
file
|
|
}
Table A-10
Output Modifier Variables for Count or Last
|
Output modifier variables:
•
begin
—Matched pattern. Up to 80 alphanumeric characters.
•
count
—Count the number of lines in the output. Add number after
the word
count
.
|—Output modifier variables.
•
end
—End with line that matches. Up to 80 alphanumeric
characters.
•
exclude
—Exclude lines that match. Up to 80 alphanumeric
characters.
•
include
—Include lines that match. Up to 80 alphanumeric
characters.
•
last
—Display last few lines of output. Add number after the word
last
. Up to 80 lines to display. Default 10.
|—Output modifier variables.
Command
Description
show cpu
Displays CPU information.
show memory
Displays the amount of system memory that each system process uses.
