Cisco Catalyst 2350, Справочник по командам

Страница: 624 / 652

C-18
Catalyst 2350 Switch Command Reference
OL-19055-01
Appendix C Catalyst 2350 Show Platform Commands
show platform port-asic
Note
Though visible in the command-line help strings, the stack { control | dest-map | learning | messages |
mvid | prog-parser | span | stats [ asic number | port number [ asic number ]] keywords are not
supported.
Command Modes Privileged EXEC
Command History
transmit { port-fifo | queue |
supervisor-sram } [ asic number |
port number [ asic number ]]
Display transmit information. The keywords have these meanings:
• port-fifo —Display the contents of the port-FIFO information
register.
•
queue —Display the contents of the queue information
register.
• supervisor-sram —Display supervisor SRAM information.
•
asic number —(Optional) Display information for the
specified ASIC. The range is 0 to 1.
• port number —(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where 0
is the supervisor and 1 to 25 are the ports.
vct [ asic number | port number
[ asic number ]]
Display the VLAN compression table entries for the specified
ASIC or for the specified port and ASIC. The keywords have these
meanings:
•
asic number —(Optional) Display information for the
specified ASIC. The range is 0 to 1.
• port number —(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
version Display version and device type information for port ASICs.
| begin (Optional) Display begins with the line that matches the
expression .
| exclude (Optional) Display excludes lines that match the expression .
| include (Optional) Display includes lines that match the specified
expression .
expression Expression in the output to use as a reference point.
Release Modification
12.2(46)EY This command was introduced.