Cisco Catalyst 2350, Справочник по командам

Страница: 220 / 652

2-196
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
radius-server dead-criteria
radius-server dead-criteria
Use the radius-server dead-criteria global configuration command to configure the conditions that
determine when a RADIUS server is considered unavailable or dead . Use the no form of this command
to return to the default settings.
radius-server dead-criteria [ time seconds [ tries number ] | tries number ]
no radius-server dead-criteria [ time seconds [ tries number ] | tries number ]
Syntax Description
Defaults The switch dynamically determines the seconds value that is from 10 to 60 seconds.
The switch dynamically determines the tries value that is from 10 to 100.
Command Modes Global configuration
Command History
Usage Guidelines We recommend that you configure the seconds and number parameters as follows:
•
Use the radius-server timeout seconds global configuration command to specify the time in
seconds during which the switch waits for a RADIUS server to respond before the authentication
times out. The switch dynamically determines the default
seconds value that is from 10 to
60 seconds.
• Use the radius-server retransmit retries global configuration command to specify the number of
times the switch tries to reach the RADIUS servers before considering the servers to be unavailable.
The switch dynamically determines the default
tries value that is from 10 to 100.
•
The seconds parameter is less than or equal to the number of retransmission attempts times the time
in seconds before the authentication times out.
•
The tries parameter should be the same as the number of retransmission attempts.
Examples
This example shows how to configure 60 as the time and 10 as the number of tries , the conditions that
determine when a RADIUS server is considered unavailable
Switch(config)# radius-server dead-criteria time 60 tries 10
You can verify your settings by entering the show running-config privileged EXEC command.
time seconds (Optional) Set the time in seconds during which the switch does not need to get a valid
response from the RADIUS server. The range is from 1 to 120 seconds.
tries number (Optional) Set the number of times that the switch does not get a valid response from
the RADIUS server before the server is considered unavailable. The range is from 1 to
100.
Release Modification
12.2(46)EY This command was introduced.