2-355
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show sdm prefer
show sdm prefer
Use the
show sdm prefer
privileged EXEC command to display information about the Switch Database
Management (SDM) templates that can be used to maximize used for allocating system resources for a
particular feature, or use the command without a keyword to display the template in use.
show sdm prefer
[
access
|
default
|
dual-ipv4-and-ipv6
{
default
|
vlan
} |
vlan
] [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
When you change the SDM template by using the
sdm prefer
global configuration command, you must
reload the switch for the configuration to take effect. If you enter the
show sdm prefer
command before
you enter the
reload
privileged EXEC command, the
show sdm prefer
command shows the template
currently in use and the template that will become active after a reload.
The numbers displayed for each template represent an approximate maximum number for each feature
resource. The actual number might vary, depending on the actual number of other features configured.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
access
(Optional) Display the template that maximizes system resources for ACLs.
default
(Optional) Display the template that balances system resources among
features.
dual-ipv4-and-ipv6
{
default
|
vlan
)
(Optional) Display the dual templates that support both IPv4 and IPv6.
•
default
—Display the default dual template configuration.
•
vlan
—Display the VLAN dual template configuration.
vlan
(Optional) Display the template that maximizes system resources for Layer 2
VLANs.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(46)EY
This command was introduced.
Содержание Catalyst 2350
