manualshive.com logo in svg

Cisco Catalyst 2350, Справочник по командам

Поделиться
Скачать
Cisco Catalyst 2350 Скачать руководство пользователя страница 300

 

2-276

Catalyst 2350 Switch Command Reference

OL-19055-01

Chapter 2    Catalyst 2350 Cisco IOS Commands

show interfaces

show interfaces

Use the 

show interfaces 

privileged EXEC command to display the administrative and operational status 

of all interfaces or a specified interface.

show interfaces

 [

interface-id

 | 

vlan

 

vlan-id

] [

accounting

 | 

capabilities

 [

module

 

number

] | 

counters

 | 

description

 | 

etherchannel

 | 

flowcontrol

 | 

pruning

 | 

stats

 | 

status

 [

err-disabled

] | 

switchport

 [

module

 

number

] | 

tengigabitethernet 

interface-id | 

transceiver

 [ 

detail | 

properties 

| 

dom-supported-list

] [

module

 

number

] | 

trunk

] [ | {

begin

 | 

exclude

 | 

include

} 

expression

]

Note

Although visible in the command-line help, the 

private-vlan mapping

 keyword is not supported.

Syntax Description

interface-id

(Optional) Valid interfaces include physical ports (including type and port 
number) and port channels. The port-channel range is 1 to 48.

vlan 

vlan-id

(Optional) VLAN identification.

 

The range is 1 to 4094. 

accounting

(Optional) Display accounting information on the interface, including active 
protocols and input and output packets and octets.

Note

The display shows only packets processed in software; 
hardware-switched packets do not appear.

capabilities

(Optional) Display the capabilities of all interfaces or the specified interface, 
including the features and options that you can configure on the interface. 
Though visible in the command line help, this option is not available for 
VLAN IDs.

module 

number

(Optional) Display 

capabilities

, 

switchport 

configuration, or 

transceiver

 

characteristics (depending on preceding keyword) of all interfaces on the 
switch. The only valid module number is 1.

This option is not available if you entered a specific interface ID.

counters

(Optional) See the 

show interfaces counters

 command.

description

(Optional) Display the administrative status and description set for an 
interface.

etherchannel

(Optional) Display interface EtherChannel information.

flowcontrol

(Optional) Display interface flowcontrol information

pruning

(Optional) Display interface trunk VTP pruning information.

stats

(Optional) Display the input and output packets by switching path for the 
interface.

status

(Optional) Display the status of the interface. A status of 

unsupported

 in the 

Type field means that a non-Cisco small form-factor pluggable (SFP) module 
is inserted in the module slot.

err-disabled

(Optional) Display interfaces in error-disabled state.

switchport

(Optional) Display the administrative and operational status of a switching 
(nonrouting) port.

tengigabitethernet

Display the status of a connected ten-gigabit module.

Содержание Catalyst 2350













































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды