Cisco Catalyst 2350, Справочник по командам

Страница: 250 / 652

2-226
Catalyst 2350 Switch Command Reference
OL-19055-01
Chapter 2 Catalyst 2350 Cisco IOS Commands
show boot
Table 2-12 show boot Field Descriptions
Field Description
BOOT path-list Displays a semicolon separated list of executable files to try to load and execute when
automatically booting.
If the BOOT environment variable is not set, the system attempts to load and execute
the first executable image it can find by using a recursive, depth-first search through the
flash file system. In a depth-first search of a directory, each encountered subdirectory
is completely searched before continuing the search in the original directory.
If the BOOT variable is set but the specified images cannot be loaded, the system
attempts to boot the first bootable file that it can find in the flash file system.
Config file Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the
system configuration.
Private Config file Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the
system configuration.
Enable Break Displays whether a break during booting is enabled or disabled. If it is set to yes, on, or
1, you can interrupt the automatic boot process by pressing the Break key on the console
after the flash file system is initialized.
Manual Boot Displays whether the switch automatically or manually boots. If it is set to no or 0, the
boot loader attempts to automatically boot up the system. If it is set to anything else,
you must manually boot up the switch from the boot loader mode.
Helper path-list Displays a semicolon separated list of loadable files to dynamically load during the boot
loader initialization. Helper files extend or patch the functionality of the boot loader.