manualshive.com logo in svg

Cisco Catalyst 2350, Справочник по командам

Поделиться
Скачать
Cisco Catalyst 2350 Скачать руководство пользователя страница 425

 

2-401

Catalyst 2350 Switch Command Reference

OL-19055-01

Chapter 2    Catalyst 2350 Cisco IOS Commands

spanning-tree extend system-id

spanning-tree extend system-id

Use the 

spanning-tree extend system-id

 global configuration command to enable the extended system 

ID feature. 

spanning-tree extend system-id

Note

Though visible in the command-line help strings, the 

no

 version of this command is not supported. You 

cannot disable the extended system ID feature.

Syntax Description

This command has no arguments or keywords.

Defaults

The extended system ID is enabled.

Command Modes

Global configuration

Command History

Usage Guidelines

The switch supports the IEEE 802.1t spanning-tree extensions. Some of the bits previously used for the 
switch priority are now used for the extended system ID (VLAN identifier for the per-VLAN 
spanning-tree plus [PVST+] and rapid PVST+ or as an instance identifier for the multiple spanning tree 
[MST]).

The spanning tree uses the extended system ID, the switch priority, and the allocated spanning-tree MAC 
address to make the bridge ID unique for each VLAN or multiple spanning-tree instance. 

Support for the extended system ID affects how you manually configure the root switch, the secondary 
root switch, and the switch priority of a VLAN. For more information, see the 

“spanning-tree mst root”

 

and the 

“spanning-tree vlan”

 sections.

If your network consists of switches that do not support the extended system ID and switches that do 
support it, it is unlikely that the switch with the extended system ID support will become the root switch. 
The extended system ID increases the switch priority value every time the VLAN number is greater than 
the priority of the connected switches.

Release

Modification

12.2(46)EY

This command was introduced.

Содержание Catalyst 2350













































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды