Cisco BPX 8600 Series, Руководство по установке и настройке

Страница: 311 / 630

21-19
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 21 Configuring ATM Connections
rt-VBR and nrt-VBR Connections
•
CDVT
• FBTC flag
• SCR
•
MBS
• Policing Type
There is no change in CDVT usage and the previous policing system.
When using the addcon command without the extended parameters, rt-VBR connections automatically
use the parameters provided by connection class 3 which contains pre-determined values. Similarly,
nrt-VBR connections use connection class 2.
To modify the values of a connection class, use the commands cnfcls and cnfatmcl.
To display these values, use the commands dspcls and dspatmcls.
Figure 21-5 rt-VBR and nrt-VBR Connection Prompt Sequence
Configuring Resources
Qbin values on both ports and trunks used by rt-VBR connections and nrt-VBR connections can be
configured separately.
rt-VBR or nrt-VBR
PCR(0+1)
%Util
CDVT(0+1)
FBTC (AAL5 Frame based traffic control, enable/disable)
SCR
MBS
Policing (1, 2, 3, 4, or 5)
For policing prompt:
1 = VBR.1
2 = VBR.2
3 = VBR.3
4 = PCR policing only
5 = policing off
Note: BW allocation = (PCR)x(%Util)
10225xmod
1
1
Trunk cell routing
restrict (Y/N) [Y]
2
2
For rt-VBR, trunk cell routing
is automatically restricted to
include only ATM trunks