Cisco BPX 8600 Series, Руководство по установке и настройке

Страница: 239 / 630

C H A P T E R
15-1
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
15
Connecting Temporary Terminal and
Attaching Peripherals
This chapter explains how to set-up a temporary terminal or network management station for initial
power-up, and how to attach other peripherals:
•
Temporarily Connecting a Terminal or NMS to the Control Port
• Connecting a Network Printer to the BPX Switch
•
Connecting Dial-In and Dial-Out Modems
• Making External Clock Connections
A network must have at least one connection to a control terminal or Cisco WAN Manager network
management workstation. You use the Cisco WAN Manager network management workstation to
configure and maintain all nodes in a network and report network statistical data.
A network printer may be connected to the AUXILIARY port if you wish to print.
If you want to have Cisco Customer Service perform remote troubleshooting, you must attach a dial-in
modem to the network. See Connecting Dial-In and Dial-Out Modems, page 15-10
Before proceeding to this chapter, you should first complete the procedures in:
–
Chapter 14, Connecting Cables
– Chapter 13, Installing the BPX Switch Cards
and before that, the procedures in either:
–
Chapter 10, Installing the DC Shelf
–
Chapter 11, Installing the AC Shelf
and
–
Chapter 12, Installing the T3/E3 Cable Management Tray
and before that, the procedures in either:
– Chapter 8, Installation with Cisco Cabinets including 7000 Series Routers
or
–
Chapter 9, Installation in Customer Cabinet
Before attempting to attach equipment to the BPX switch, read the manufacturer’s literature to ensure
that you have made the equipment ready for attachment.
For additional information, refer to these sources: