Cisco BPX 8600 Series, Руководство по установке и настройке

Страница: 301 / 630

21-9
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 21 Configuring ATM Connections
ATM Connection Requirements
pubsbpx1 TN silves BPX 8620 9.2.2G July 21 1999 21:32 PDT
Local Remote Remote Route
Channel NodeName Channel State Type Avoid COS O
2.2.1.4 pubsbpx1 2.3.5.7 Ok nrt-vbr
2.2.1.5 pubsbpx1 2.3.5.8 Ok rt-vbr
2.2.1.6 pubsbpx1 2.3.5.9 Ok rt-vbr
2.3.5.7 pubsbpx1 2.2.1.4 Ok nrt-vbr
2.3.5.8 pubsbpx1 2.2.1.5 Ok rt-vbr
2.3.5.9 pubsbpx1 2.2.1.6 Ok rt-vbr
This Command: addcon 2.2.11.11 pubsbpx1 2.3.12.12
Enter (nrt/rt-VBR,CBR,UBR,ABRSTD,ABRFST,ATFR,ATFST,ATFT,ATFTFST,ATFX,ATFXFST)
or class number:
Instead of entering a class of service, you can instead enter a class number to select a pre-configured
template, for example, class 4 for NTR-VBR, and class 3 for RT-VBR. You can modify the class of
service templates as required by using the cnfcls/cnfatmcls command and displaying them by using the
dspcls/dspatmcls command.
Note For a new node running 9.2.20 or later, the rt-VBR connection class number is 3. An
upgraded node will retain existing connection classes. Therefore, it won’t have the
rt-VBR connection class 3. However, the user can configure the connection classes to
whatever service and parameters they want using the cnfcls/cnfatmcls command.
An example of a cnfcls/cnfatmcls command and response is shown in the following example:
pubsbpx1 TN silves:1 BPX 8620 9.2.2G July 16 1999 10:42 PDT
ATM Connection Classes
Class: 2 Type: nrt-VBR
PCR(0+1) % Util CDVT(0+1) AAL5 FBTC SCR
1000/1000 100/100 10000/10000 n 1000/1000
MBS Policing
1000/1000 3
Description: "Default nrt-VBR 1000 "
This Command: cnfcls atm 2
Enter class type (rt-VBR, nrt-VBR, CBR, UBR, ABRSTD, ABRFST, ATFR, ATFST, ATFT,
ATFTFST, ATFX, ATFXFST):