![background image](http://html.mh-extra.com/html/cisco/asr-9000-series/asr-9000-series_command-reference-manual_64844793.webp)
ssrp location
To specify the node on which to create a Session State Redundancy Protocol (SSRP) group and enter the
SSRP node configuration mode, use the
ssrp location
command in global configuration mode.
ssrp location node_id
Syntax Description
Specifies the full qualified path of a specific node in the format
rack
/
slot
/
module.
node_id
Command Default
No default behavior or values
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The location specifies the card on which an SSRP group is created.
Task ID
Operations
Task ID
read, write
ppp
Examples
This example shows how to create an SSRP group on a specified node for use by any interface on the card:
RP/0/RSP0/CPU0:router#
config
RP/0/RSP0/CPU0:router(config)#
ssrp location 0/1/cpu0
RP/0/RSP0/CPU0:router(config-ssrp-node)#
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
773
PPP Commands onthe Cisco ASR 9000 Series Router
ssrp location