snmp-server traps frame-relay pvc
To enable Simple Network Management Protocol (SNMP) trap notifications for a Frame Relay permanent
virtual circuit (PVC), use the
snmp-server traps frame-relay pvc
command in global configuration mode.
To disable SNMP notifications for a FR PVC, use the
no
form of this command.
snmp-server traps frame-relay pvc
[
interval seconds
]
no snmp-server traps frame-relay pvc
[
interval seconds
]
Syntax Description
(Optional) Minimum period between successive traps. The range is from
1 to 3600.
interval seconds
Command Default
seconds
: 30
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the
snmp-server traps frame-relay pvc
command to enable trap requests for a Frame Relay PVC. This
command is used with the
snmp-server host
command. Use the
snmp-server host
command to specify which
host or hosts receive SNMP notifications.
See
Implementing SNMP on Cisco IOS XR Software
in
Cisco ASR 9000 Series Aggregation Services Router
System Management Configuration Guide
for detailed information about SNMP configuration tasks and
commands.
Task ID
Operations
Task ID
read, write
snmp
read, write
fr
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
491
Frame Relay Commands on the Cisco ASR 9000 Series Router
snmp-server traps frame-relay pvc