9-16
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Chapter 9 Routine Procedures
Uninstalling the Microsoft Hot Fix
You can use ACU or ACM to turn the client adapter’s radio on or off. Follow the instructions below to
use ACU or refer to the
“Turn Radio On/Off” section on page 8-7
to use ACM.
If your client adapter’s radio is on, open ACU and select Turn Radio Off from the Commands
drop-down menu (see
Figure 9-6
) to turn off the radio. The status bar at the bottom of the ACU screen
indicates that the radio is turned off.
If your client adapter’s radio is off, open ACU and select Turn Radio On from the Commands
drop-down menu (see
Figure 9-6
) to turn on the radio.
Uninstalling the Microsoft Hot Fix
When LEAP is selected during installation on a Windows 98 or 98 SE device, a Microsoft hot fix is also
installed to fix two problems related to the use of LEAP. If you ever need to uninstall the hot fix, select
Start > Run, enter C:\Windows\Inf\Qfe\W98.se\241052un.inf, and click OK.
