5-36
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Note
The LEAP option is available only if you selected the LEAP security module during installation.
Note
When you select this option, dynamic WEP (if WPA is disabled) or TKIP (if WPA is enabled)
is set automatically.
Step 3
Click the Configure LEAP button. The LEAP Settings screen appears (see
Figure 5-7
).
Figure 5-7
LEAP Settings Screen
Step 4
Select one of the following LEAP username and password setting options:
•
Use Temporary User Name and Password—Requires you to enter the LEAP username and
password each time the computer reboots in order to authenticate and gain access to the network.
•
Use Saved User Name and Password—Does not require you to enter a LEAP username and
password each time the computer reboots. Authentication occurs automatically as needed using a
saved username and password (which are registered with the RADIUS server).
Note
The Use Saved User Name and Password option is available only if the Allow Saved LEAP
User Name and Password option was enabled (set to Yes) during installation.