5-32
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Using Static WEP
This section provides instructions for entering new static WEP keys or overwriting existing static WEP
keys.
Entering a New Static WEP Key
Follow the steps below to enter a new static WEP key for this profile.
Step 1
Select None under Network Authentication on the Network Security screen.
Step 2
Select Static WEP under Data Encryption.
Step 3
Click the Static WEP Keys button. The Static WEP Keys screen appears (see
Figure 5-6
).
Fast roaming (CCKM)
Enable LEAP and select Allow Fast
Roaming (CCKM)
Use firmware version 12.2(11)JA
or greater, select a cipher suite that
is compatible with CCKM, and
enable Network-EAP and CCKM
for the SSID
Note
To allow both 802.1X
clients and non-802.1X
clients to use the SSID,
enable optional CCKM.
Reporting access points
that fail LEAP
authentication
No settings required; automatically
enabled in firmware version
5.02.20 or greater
No settings required; automatically
enabled in the following firmware
versions: 12.00T or greater (340,
350, and 1200 series access points)
or Cisco IOS Release 12.2(4)JA or
greater (1100 series access points)
MIC
No settings required; automatically
enabled by the driver included in
the Install Wizard file
Set up and enable WEP with full
encryption, set MIC to MMH or
select Enable MIC check box, and
set Use Aironet Extensions to Yes
TKIP
No settings required; automatically
enabled by the firmware included
in the Install Wizard file
Set up and enable WEP, set TKIP to
Cisco or select Enable Per Packet
Keying check box, and set Use
Aironet Extensions to Yes
Broadcast key rotation
Enable LEAP, EAP-TLS, PEAP, or
EAP-SIM and use the firmware
included in the Install Wizard file
Set up and enable WEP and set
Broadcast WEP Key Rotation
Interval to any value other than
zero (0)
Table 5-6
Client and Access Point Security Settings (continued)
Security Feature
Client Setting
Access Point Setting
