manualshive.com logo in svg

Cisco 3845 - Security Bundle Router, Руководство пользователя программного обеспечения

Маршрутизатор Cisco 3845 - Security Bundle Router является надежным и безопасным решением для вашей сети. Скачайте бесплатно руководство по эксплуатации и программное обеспечение на {веб-сайт}, чтобы использовать его на максимуме. Узнайте все возможности и настройки вашего устройства.

Поделиться
Скачать
background image

 

33-24

Cisco ME 3800X and 3600X Switch Software Configuration Guide

OL-23400-01

Chapter 33      Configuring IP Multicast Routing

Configuring IP Multicast Routing

These sections describe how to configure Auto-RP:

•

Setting up Auto-RP in a New Internetwork, page 33-24

 (optional)

•

Adding Auto-RP to an Existing Sparse-Mode Cloud, page 33-24

 (optional)

•

Preventing Join Messages to False RPs, page 33-25

 (optional)

•

Filtering Incoming RP Announcement Messages, page 33-26

 (optional)

For overview information, see the 

“Auto-RP” section on page 33-6

. 

Setting up Auto-RP in a New Internetwork

If you are setting up Auto-RP in a new internetwork, you do not need a default RP because you configure 
all the interfaces for sparse-dense mode. Follow the process described in the 

“Adding Auto-RP to an 

Existing Sparse-Mode Cloud” section on page 33-24

. However, omit Step 3 if you want to configure a 

PIM router as the RP for the local group.

Adding Auto-RP to an Existing Sparse-Mode Cloud

This section contains some suggestions for the initial deployment of Auto-RP into an existing 
sparse-mode cloud to minimize disruption of the existing multicast infrastructure.

Beginning in privileged EXEC mode, follow these steps to deploy Auto-RP in an existing sparse-mode 
cloud. This procedure is optional.

Command

Purpose

Step 1

show running-config

Verify that a default RP is already configured on all PIM devices and the 
RP in the sparse-mode network. It was previously configured with the ip 
pim rp-address global configuration command.

This step is not required for spare-dense-mode environments.

The selected RP should have good connectivity and be available across 
the network. Use this RP for the global groups (for example 224.x.x.x 
and other global groups). Do not reconfigure the group address range that 
this RP serves. RPs dynamically discovered through Auto-RP take 
precedence over statically configured RPs. Assume that it is desirable to 
use a second RP for the local groups.

Step 2

configure terminal

Enter global configuration mode.

Step 3

ip pim send-rp-announce interface-id 
scope ttl group-list access-list-number 
interval seconds

Configure another PIM device to be the candidate RP for local groups.

•

For interface-id, enter the interface type and number that identifies 
the RP address. Valid interfaces include physical ports, port 
channels, and VLANs.

•

For scope ttl, specify the time-to-live value in hops. Enter a hop 
count that is high enough so that the RP-announce messages reach 
all mapping agents in the network. There is no default setting. The 
range is 1 to 255.

•

For group-list access-list-number, enter an IP standard access list 
number from 1 to 99. If no access list is configured, the RP is used 
for all groups.

•

For interval seconds, specify how often the announcement messages 
must be sent. The default is 60 seconds. The range is 1 to 16383.

Содержание 3845 - Security Bundle Router





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3845 - Security Bundle Router

Radwin Transportation FiberinMotion Deployment Manual preview
Transportation FiberinMotion
Бренд: Radwin Страницы: 122
NETGEAR RP334 Specifications preview
RP334
Бренд: NETGEAR Страницы: 2
Patton 13243D4-001 User Manual preview
13243D4-001
Бренд: Patton Страницы: 62
ZyXEL Communications P-335U Specifications preview
P-335U
Бренд: ZyXEL Communications Страницы: 2
MA lighting 8Port Node Quick Manual preview
8Port Node
Бренд: MA lighting Страницы: 49
UNICOM DynaGST/2402G GEP-33224T-1 User Manual preview
DynaGST/2402G GEP-33224T-1
Бренд: UNICOM Страницы: 17
netsys NVF-2400S User Manual preview
NVF-2400S
Бренд: netsys Страницы: 164
Spirent A2-400 Installation Instructions Manual preview
A2-400
Бренд: Spirent Страницы: 22
Barracuda CloudGen Firewall Revision preview
CloudGen Firewall
Бренд: Barracuda Страницы: 8
NetComm RTA100 User Manual preview
RTA100
Бренд: NetComm Страницы: 75
Proscend 6200-2W User Manual preview
6200-2W
Бренд: Proscend Страницы: 93
Ryobi RE180PL1 Operator'S Manual preview
RE180PL1
Бренд: Ryobi Страницы: 44
WatchNet ENM-04 POE Quick Connection Manual preview
ENM-04 POE
Бренд: WatchNet Страницы: 2
Alcatel 7750 SR-12 Installation Manual preview
7750 SR-12
Бренд: Alcatel Страницы: 158
JETWAY FDF13 Series Quick Installation Manual preview
FDF13 Series
Бренд: JETWAY Страницы: 15
IEI Technology PUZZLE-5030 User Manual preview
PUZZLE-5030
Бренд: IEI Technology Страницы: 119
Planet Networking & Communication VRT-311 User Manual preview
VRT-311
Бренд: Planet Networking & Communication Страницы: 147
Tripp Lite N302-006 Specification Sheet preview
N302-006
Бренд: Tripp Lite Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды