manualshive.com logo in svg

Cisco 3845 - Security Bundle Router, Руководство пользователя программного обеспечения

Маршрутизатор Cisco 3845 - Security Bundle Router является надежным и безопасным решением для вашей сети. Скачайте бесплатно руководство по эксплуатации и программное обеспечение на {веб-сайт}, чтобы использовать его на максимуме. Узнайте все возможности и настройки вашего устройства.

Поделиться
Скачать
background image

 

8-26

Cisco ME 3800X and 3600X Switch Software Configuration Guide

OL-23400-01

Chapter 8      Configuring Switch-Based Authentication

Controlling Switch Access with RADIUS

To remove the specified RADIUS server, use the no radius-server host hostname | ip-address global 
configuration command. To remove a server group from the configuration list, use the no aaa group 
server radius group-name global configuration command. To remove the IP address of a RADIUS 
server, use the no server ip-address server group configuration command.

In this example, the switch is configured to recognize two different RADIUS group servers (group1 and 
group2). Group1 has two different host entries on the same RADIUS server configured for the same 
services. The second host entry acts as a fail-over backup to the first entry.

Switch(config)# 

radius-server host 172.20.0.1 auth-port 1000 acct-port 1001

Switch(config)# 

radius-server host 172.10.0.1 auth-port 1645 acct-port 1646

Switch(config)# 

aaa new-model

Switch(config)# 

aaa group server radius group1

Switch(config-sg-radius)# 

server 172.20.0.1 auth-port 1000 acct-port 1001

Switch(config-sg-radius)# 

exit

Switch(config)# 

aaa group server radius group2

Switch(config-sg-radius)# 

server 172.20.0.1 auth-port 2000 acct-port 2001

Switch(config-sg-radius)# 

exit

Configuring RADIUS Authorization for User Privileged Access and Network Services

AAA authorization limits the services available to a user. When AAA authorization is enabled, the 
switch uses information retrieved from the user’s profile, which is in the local user database or on the 
security server, to configure the user’s session. The user is granted access to a requested service only if 
the information in the user profile allows it.

You can use the aaa authorization global configuration command with the radius keyword to set 
parameters that restrict a user’s network access to privileged EXEC mode. 

The aaa authorization exec radius local command sets these authorization parameters:

•

Use RADIUS for privileged EXEC access authorization if authentication was performed by using 
RADIUS.

•

Use the local database if authentication was not performed by using RADIUS.

Note

Authorization is bypassed for authenticated users who log in through the CLI even if authorization has 
been configured.

Beginning in privileged EXEC mode, follow these steps to specify RADIUS authorization for privileged 
EXEC access and network services: 

Step 8

copy running-config startup-config

(Optional) Save your entries in the configuration file.

Step 9

Enable RADIUS login authentication. See the 

“Configuring RADIUS 

Login Authentication” section on page 8-22

.

Command

Purpose

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

aaa authorization network radius

Configure the switch for user RADIUS authorization for all 
network-related service requests.

Содержание 3845 - Security Bundle Router





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3845 - Security Bundle Router

Patton electronics 1090 Service Manual preview
1090
Бренд: Patton electronics Страницы: 8
Patton electronics SMART NODE 4950-NCE Quick Start Manual preview
SMART NODE 4950-NCE
Бренд: Patton electronics Страницы: 8
Patton electronics NetLink 2960 RAS Datasheet preview
NetLink 2960 RAS
Бренд: Patton electronics Страницы: 2
Patton electronics 3101RC Specifications preview
3101RC
Бренд: Patton electronics Страницы: 2
Qlogic iSR6200 Quick Start Manual preview
iSR6200
Бренд: Qlogic Страницы: 20
Watchguard Firebox T15 Quick Start Manual preview
Firebox T15
Бренд: Watchguard Страницы: 39
Hawking CF100W Specifications preview
CF100W
Бренд: Hawking Страницы: 2
8level IPG-200 User Manual preview
IPG-200
Бренд: 8level Страницы: 52
Lucent Technologies Cajun P118LX Installation Manual preview
Cajun P118LX
Бренд: Lucent Technologies Страницы: 20
Juniper NFX250 Quick Start Manual preview
NFX250
Бренд: Juniper Страницы: 7
Supermicro AOC-MGP-i2 User Manual preview
AOC-MGP-i2
Бренд: Supermicro Страницы: 27
Digisol DG-BG4100NU Quick Installation Manual preview
DG-BG4100NU
Бренд: Digisol Страницы: 22
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Бренд: BinTec Страницы: 34
Buffalo BS-GS2008P Quick Setup Manual preview
BS-GS2008P
Бренд: Buffalo Страницы: 2
Linksys WRK54G User Manual preview
WRK54G
Бренд: Linksys Страницы: 80
Multi-Tech RoteFinder RF500S User Manual preview
RoteFinder RF500S
Бренд: Multi-Tech Страницы: 134
Gemtek WL-613F User Manual preview
WL-613F
Бренд: Gemtek Страницы: 29
LevelOne CamCon FCS-4000 User Manual preview
CamCon FCS-4000
Бренд: LevelOne Страницы: 94

Бренды по названию

Популярные бренды

Загрузить еще бренды