manualshive.com logo in svg

Cisco 3845 - Security Bundle Router, Руководство пользователя программного обеспечения

Маршрутизатор Cisco 3845 - Security Bundle Router является надежным и безопасным решением для вашей сети. Скачайте бесплатно руководство по эксплуатации и программное обеспечение на {веб-сайт}, чтобы использовать его на максимуме. Узнайте все возможности и настройки вашего устройства.

Поделиться
Скачать
background image

 

3-7

Cisco ME 3800X and 3600X Switch Software Configuration Guide

OL-23400-01

Chapter 3      Assigning the Switch IP Address and Default Gateway

Assigning Switch Information

If your DHCP server is a Cisco device, see the “Configuring DHCP” section of the “IP Addressing and 
Services” section of the Cisco IOS IP Configuration Guide, Release 12.2 for additional information 
about configuring DHCP. 

DHCP Server Configuration Guidelines

Follow these guidelines if you are configuring a device as a DHCP server:

You should configure the DHCP server with reserved leases that are bound to each switch by the switch 
hardware address.

If you want the switch to receive IP address information, you must configure the DHCP server with these 
lease options:

•

IP address of the client (required)

•

Subnet mask of the client (required)

•

DNS server IP address (optional)

•

Router IP address (default gateway address to be used by the switch) (required)

If you want the switch to receive the configuration file from a TFTP server, you must configure the 
DHCP server with these lease options:

•

TFTP server name (required)

•

Boot filename (the name of the configuration file that the client needs) (recommended)

•

Hostname (optional)

Depending on the settings of the DHCP server, the switch can receive IP address information, the 
configuration file, or both.

If you do not configure the DHCP server with the lease options described previously, it replies to client 
requests with only those parameters that are configured. If the IP address and the subnet mask are not in 
the reply, the switch is not configured. If the router IP address or the TFTP server name are not found, 
the switch might send broadcast, instead of unicast, TFTP requests. Unavailability of other lease options 
does not affect autoconfiguration.

The switch can act as a DHCP server. By default, the Cisco IOS DHCP server and relay agent features 
are enabled on your switch but are not configured. These features are not operational. If your DHCP 
server is a Cisco device, for additional information about configuring DHCP, see the “Configuring 
DHCP” section of the “IP Addressing and Services” section of the Cisco IOS IP Configuration Guide 
from the Cisco.com page under Documentation > Cisco IOS Software > 12.2 Mainline > 
Configuration Guides. 

Configuring the TFTP Server

Based on the DHCP server configuration, the switch attempts to download one or more configuration 
files from the TFTP server. If you configured the DHCP server to respond to the switch with all the 
options required for IP connectivity to the TFTP server, and if you configured the DHCP server with a 
TFTP server name, address, and configuration filename, the switch attempts to download the specified 
configuration file from the specified TFTP server.

If you did not specify the configuration filename, the TFTP server, or if the configuration file could not 
be downloaded, the switch attempts to download a configuration file by using various combinations of 
filenames and TFTP server addresses. The files include the specified configuration filename (if any) and 

Содержание 3845 - Security Bundle Router





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3845 - Security Bundle Router

3onedata IES615-2D Series Quick Installation Manual preview
IES615-2D Series
Бренд: 3onedata Страницы: 3
3One data 7212 User Manual preview
7212
Бренд: 3One data Страницы: 5
3onedata IEM615 Series Hardware User Manual preview
IEM615 Series
Бренд: 3onedata Страницы: 33
Abocom FW200 Specifications preview
FW200
Бренд: Abocom Страницы: 1
H3C S5500-HI Switch Series Fundamentals Configuration Manual preview
S5500-HI Switch Series
Бренд: H3C Страницы: 180
H3C S3610 Series Quick Start Manual preview
S3610 Series
Бренд: H3C Страницы: 84
H3C S3600V2 SERIES Layer 2-Lan Switching Configuration Manual preview
S3600V2 SERIES
Бренд: H3C Страницы: 281
H3C S12500R-2L Preparing For Installation preview
S12500R-2L
Бренд: H3C Страницы: 8
H3C S12500R Series Manual preview
S12500R Series
Бренд: H3C Страницы: 9
H3C S12500R Series Installation, Quick Start preview
S12500R Series
Бренд: H3C Страницы: 33
H3C S12500R Series Hardware Reference Manual preview
S12500R Series
Бренд: H3C Страницы: 42
H3C S12500R Series Installation Manual preview
S12500R Series
Бренд: H3C Страницы: 102
H3C S12500CR Series Preparing For Installation preview
S12500CR Series
Бренд: H3C Страницы: 9
H3C RA200 Manual preview
RA200
Бренд: H3C Страницы: 15
H3C H3C S7500E Series Command Manual preview
H3C S7500E Series
Бренд: H3C Страницы: 1565
H3C MSR810 Installation, Quick Start preview
MSR810
Бренд: H3C Страницы: 4
N-Tron 702-W User Manual & Installation Manual preview
702-W
Бренд: N-Tron Страницы: 62
Paradyne MCC Installation Instructions Manual preview
MCC
Бренд: Paradyne Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды