![background image](http://html.mh-extra.com/html/cisco/2800-series/2800-series_manual_64812033.webp)
17
Basic Software Configuration Using the Setup Command Facility
OL-5992-01
Examples of Using the Setup Command Facility to Configure Interface Parameters
ISDN BRI Line Configuration
Before using a router with an ISDN basic rate interface (BRI) interface, you must order a correctly
configured ISDN BRI line from your local telecommunications service provider.
The ordering process varies from provider to provider and from country to country. However, some
general guidelines apply:
•
Ask for two channels to be called by one number.
•
Ask for delivery of calling line identification, also known as
Caller ID
or
automated number
identification
(ANI).
•
If the router will be the only device attached to the ISDN BRI line, ask for point-to-point service
and a data-only line.
•
If you plan to connect another ISDN device (such as an ISDN telephone) to the ISDN BRI line
through the router, ask for point-to-multipoint service (subaddressing is required) and a
voice-and-data line.
ISDN BRI Provisioning by Switch Type
ISDN BRI provisioning
refers to the types of services provided by the ISDN BRI line. Although
provisioning is performed by your ISDN BRI service provider, you must tell the provider what you want.
lists the provisioning you that should order for the router, based on switch type.
Table 2
ISDN Provisioning by Switch Type
Switch Type
Provisioning
5ESS Custom BRI
For data only
2 B channels for data.
Point to point.
Terminal type = E.
1 directory number (DN) assigned by service provider.
MiniTerm (MTERM) = 1.
Request delivery of calling line ID on Centrex lines.
Set speed for ISDN calls to 56 kbps outside local exchange.
5ESS Custom BRI
For voice and data
(Use these values only if you have an ISDN telephone connected.)
2 B channels for voice or data.
Multipoint.
Terminal type = D.
2 directory numbers assigned by service provider.
2 service profile identifiers (SPIDs) required, assigned by service provider.
MTERM = 2.
Number of call appearances = 1.
Display = No.
Ringing/idle call appearances = idle.
Autohold= no.
Onetouch = no.
Request delivery of calling line ID on Centrex lines.
Set speed for ISDN calls to 56 kbps outside local exchange.
Directory number 1 can hunt to directory number 2.
Содержание 2800 Series
Страница 64: ...22 Basic Software Configuration Using the Cisco IOS Command Line Interface OL 5593 01 Additional References ...
Страница 125: ...Easy VPN Configuration Example Configure 5 OL 6340 01 Private IP address pool 192 168 3 0 24 ...
Страница 138: ...Easy VPN Configuration Example Related Information 18 OL 6340 01 ...
Страница 140: ...Easy VPN Configuration Example Related Information 20 OL 6340 01 ...