background image

 

Corporate Headquarters:

Copyright © 2004 Cisco Systems, Inc. All rights reserved.

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Preface

This preface describes the objectives, audience, organization, and conventions of the software 
configuration documentation for your router. It contains the following sections:

  •

Objectives, page 1

  •

Audience, page 1

  •

Conventions, page 1

  •

Obtaining Documentation, page 2

  •

Documentation Feedback, page 3

  •

Obtaining Technical Assistance, page 3

  •

Obtaining Additional Publications and Information, page 5

Objectives

These documents explains how to configure and maintain your Cisco router.

Audience

These documents are designed for the person installing, configuring, and maintaining the Cisco router, 
who should be familiar with networking technology and terminology.

Conventions

These documents use the conventions listed in 

Table 1

 to convey instructions and information.

Содержание 2800 Series











































































































































































































































































Отзывы: