![background image](http://html.mh-extra.com/html/cisco/2800-series/2800-series_manual_64812258.webp)
Upgrading the System Image
How to Upgrade the System Image
20
OL-5595-01
Step 12
copy run start
Use this command to copy the running configuration to the startup configuration:
Router#
copy run start
Step 13
reload
Use this command to reload the operating system:
Router#
reload
Step 14
When prompted to save the system configuration, enter
no
:
System configuration has been modified. Save? [yes/no]:
no
Step 15
When prompted to confirm the reload, enter
y
:
Proceed with reload? [confirm]
y
Step 16
show version
Use this command to verify that the router loaded the proper system image:
Router#
show version
00:22:25: %SYS-5-CONFIG_I: Configured from console by console
Cisco Internetwork Operating System Software
.
.
.
System returned to ROM by reload
System image file is "
flash:c2600-i-mz.121-14.bin
"
What to Do Next
Proceed to the
“Saving Backup Copies of Your New System Image and Configuration” section on
Loading the New System Image from ROM Monitor Mode
This section describes how to load the new system image from ROM monitor mode.
SUMMARY STEPS
1.
dir flash:
[
partition-number
:
]
2.
confreg 0x2102
3.
boot flash:
[
partition-number
:
]
filename
4.
After the system loads the new system image, press
Return
a few times to display the Cisco IOS
command-line interface (CLI) prompt.
5.
enable
6.
configure terminal
7.
no boot system
8.
boot system
flash
new-system-image-filename
Содержание 2800 Series
Страница 64: ...22 Basic Software Configuration Using the Cisco IOS Command Line Interface OL 5593 01 Additional References ...
Страница 125: ...Easy VPN Configuration Example Configure 5 OL 6340 01 Private IP address pool 192 168 3 0 24 ...
Страница 138: ...Easy VPN Configuration Example Related Information 18 OL 6340 01 ...
Страница 140: ...Easy VPN Configuration Example Related Information 20 OL 6340 01 ...