![background image](http://html.mh-extra.com/html/cisco/2800-series/2800-series_manual_64812195.webp)
5
Changing the Configuration Register Settings
OL-5598-01
Displaying the Configuration Register Settings
Note
The Cisco IOS software does not allow you to change the console speed bits directly with the
config-register
command. To change the console speed from the Cisco IOS CLI, see the
“Configuring the Console Line Speed (Cisco IOS CLI)” section on page 5
.
Step 8
Exit global configuration mode:
Router(config)#
end
Router#
Step 9
Save the configuration changes to NVRAM:
Router#
copy run start
The new configuration register settings are saved to NVRAM, but they do not take effect until the next
router reload or power cycle.
Displaying the Configuration Register Settings
To display the configuration register settings that are currently in effect and the settings that will be used
at the next router reload, enter the
show version
command in privileged EXEC mode.
The configuration register settings are displayed in the last line of the
show version
command output:
Configuration register is 0x142 (will be 0x142 at next reload)
Configuring the Console Line Speed (Cisco IOS CLI)
The combined setting of bits 5, 11, and 12 determines the console line speed. You can modify these
particular configuration register bits only from the ROM monitor. See ”
To configure the console line speed from the Cisco IOS command-line interface, complete the following
steps:
Command or Action
Purpose
Step 1
Router>
enable
Password:
password
Router#
Enables privileged EXEC mode. Enter your password if
prompted.
Step 2
Router#
configure terminal
Router(config)#
Enters global configuration mode.
Step 3
Router(config)#
line console 0
Router(config-line)#
Specifies the console line and enters line configuration
mode.
Step 4
Router(config-line)#
speed
baud
Specifies the console line speed. Possible values (in
baud): 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200.
Содержание 2800 Series
Страница 64: ...22 Basic Software Configuration Using the Cisco IOS Command Line Interface OL 5593 01 Additional References ...
Страница 125: ...Easy VPN Configuration Example Configure 5 OL 6340 01 Private IP address pool 192 168 3 0 24 ...
Страница 138: ...Easy VPN Configuration Example Related Information 18 OL 6340 01 ...
Страница 140: ...Easy VPN Configuration Example Related Information 20 OL 6340 01 ...