![background image](http://html.mh-extra.com/html/cisco/2800-series/2800-series_manual_64812192.webp)
2
Changing the Configuration Register Settings
OL-5598-01
About the Configuration Register
describes the configuration register bits.
Table 1
Configuration Register Bit Descriptions
Bit
Number
Hexadecimal
Meaning
00–03
0x0000–0x000F Boot field. The boot field setting determines whether the router loads an
operating system and where it obtains the system image.
See
06
0x0040
Causes the system software to ignore the contents of NVRAM.
07
0x0080
Original Equipment Manufacturer (OEM) bit enabled.
08
0x0100
Controls the console Break key:
•
(Factory default) Setting bit 8 causes the processor to ignore the
console Break key.
•
Clearing bit 8 causes the processor to interpret Break as a command
to force the router into the ROM monitor mode, halting normal
operation.
Break can always be sent in the first 60 seconds while the router is
rebooting, regardless of the configuration register settings.
09
0x0200
This bit controls the system boot:
•
Setting bit 9 causes the system to use the secondary bootstrap.
•
(Factory default) Clearing bit 9 causes the system to boot from flash
memory.
This bit is typically not modified.
10
0x0400
Controls the host portion of the IP broadcast address:
•
Setting bit 10 causes the processer to use all zeros.
•
(Factory default) Clearing bit 10 causes the processor to use all ones.
Bit 10 interacts with bit 14, which controls the network and subnet
portions of the IP broadcast address. See
for the combined effects
of bits 10 and 14.
05, 11,
12
0x0020,
0x0800, 0x1000
Controls the console line speed. See
for the eight available bit
combinations and console line speeds.
Factory default is 9600 baud, where bits 5, 11, and 12 are all zero (clear).
Note
You cannot change the console line speed configuration register
bits from the Cisco IOS command-line interface (CLI). You can,
however, change these bits from the ROM monitor (see
”). Or, instead of changing the configuration
register settings, you can set the console line speed through other
Cisco IOS commands..
13
0x2000
Determines how the router responds to a network boot failure:
•
Setting bit 13 causes the router to boot the default ROM software
after 6 unsuccessful network boot attempts.
•
(Factory default) Clearing bit 13 causes the router to indefinitely
continue network boot attempts.
Содержание 2800 Series
Страница 64: ...22 Basic Software Configuration Using the Cisco IOS Command Line Interface OL 5593 01 Additional References ...
Страница 125: ...Easy VPN Configuration Example Configure 5 OL 6340 01 Private IP address pool 192 168 3 0 24 ...
Страница 138: ...Easy VPN Configuration Example Related Information 18 OL 6340 01 ...
Страница 140: ...Easy VPN Configuration Example Related Information 20 OL 6340 01 ...