![background image](http://html.mh-extra.com/html/cisco/2800-series/2800-series_manual_64812218.webp)
22
Using the ROM Monitor
OL-5997-02
How to Use the ROM Monitor—Typical Tasks
Step 8
GE_PORT=
[
0
|
1
]
Example:
rommon > GE_PORT=0
(Optional) Sets the input port to use one of the Gigabit
Ethernet ports (not available on Cisco 1800 series routers,
Cisco 2801 routers, or Cisco 2811 routers).
Step 9
GE_SPEED_MODE=
[
0
|
1 | 2 | 3 | 4 | 5
]
Example:
rommon > GE_SPEED_MODE=3
(Optional) Sets the Gigabit Ethernet port speed mode, with
these options:
•
0
—10 Mbps, half-duplex
•
1
—10 Mbps, full-duplex
•
2
—100 Mbps, half-duplex
•
3
—100 Mbps, full-duplex
•
4
—1 Gbps, full-duplex
•
5
—Automatic selection (default)
(This option is not available on Cisco 1800 series routers,
Cisco 2801 routers, or Cisco 2811 routers.)
Step 10
MEDIA_TYPE=
[
0
|
1
]
Example:
rommon > MEDIA_TYPE=1
(Optional) Sets the Gigabit Ethernet connection media type,
RJ-45 (0) or SFP (1). Small form-factor pluggable (SFP)
mode is applicable only if GE_PORT=0 (gig 0/0); RJ-45
mode is available on both gig 0/0 and gig 0/1 (GE_PORT =
0 or 1). (This option is not available on Cisco 1800 series
routers, Cisco 2801 routers, or Cisco 2811 routers.)
Step 11
TFTP_CHECKSUM=[0 | 1]
Example:
rommon > TFTP_CHECKSUM=0
(Optional) Determines whether the router performs a
checksum test on the downloaded image.
•
1
—Checksum test is performed (default).
•
0
—No checksum test is performed.
Step 12
TFTP_DESTINATION=[flash: | usbflash0: |
usbflash1:]
Example:
rommon > TFTP_DESTINATION=usbflash0:
(Optional) Designates the targeted flash device as compact
flash or USB flash.
•
flash:
—Compact flash device (default).
•
usbflash0:
—USB flash device inserted in port 0
•
usbflash1:
—USB flash device inserted in port 1
Step 13
TFTP_MACADDR=
MAC_address
Example:
rommon > TFTP_MACADDR=000e.8335.f360
(Optional) Sets the Media Access Controller (MAC)
address for this router.
Step 14
TFTP_RETRY_COUNT=
retry_times
Example:
rommon > TFTP_RETRY_COUNT=10
(Optional) Sets the number of times that the router attempts
Address Resolution Protocol (ARP) and TFTP download.
The default is 7.
Step 15
TFTP_TIMEOUT=
time
Example:
TFTP_TIMEOUT=1800
(Optional) Sets the amount of time, in seconds, before the
download process times out. The default is 2400 seconds
(40 minutes).
Command or Action
Purpose
Содержание 2800 Series
Страница 64: ...22 Basic Software Configuration Using the Cisco IOS Command Line Interface OL 5593 01 Additional References ...
Страница 125: ...Easy VPN Configuration Example Configure 5 OL 6340 01 Private IP address pool 192 168 3 0 24 ...
Страница 138: ...Easy VPN Configuration Example Related Information 18 OL 6340 01 ...
Страница 140: ...Easy VPN Configuration Example Related Information 20 OL 6340 01 ...