Circutor SVGm-3WF-100C-480, Инструкция по эксплуатации

Страница: 55 / 102

55
Instruction Manual
SVGm
6�12�- SLAVE DEVICE STATUS
Note: This screen is not visible on the “slave” devices.
Note: This screen is only displayed if a system has been configured with devices in parallel.
This screen,
Figure 55,
shows the status of each “ slave ” device.
Figure 55: Slave device status screen (1)�
The “ slave ” to be checked can be selected from the top tab, by serial number.
Select the “ slave ”; the screen shown in
Figure 56
will be displayed. This screen shows the Model, Type
and Serial number of the device, as well as its status, active alarms and the temperature of the IGBTs
and inductors.
Figure 56: Slave device status screen (2)�
Note: If there is a communication error, the message “ Communication error ” will appear when you
select the affected device.