Circutor SVGm-3WF-100C-480, Инструкция по эксплуатации

Страница: 58 / 102

58
SVGm
Instruction Manual
● Type,
device range:

30 kvar
: 20.7 and 30 kvar model.

60 kvar : 41.4 and 60 kvar model.

67 kvar : 67 kvar model.

100 kvar
: 69 and 100 kvar model.
Press the key to access the next configuration step
Press the key to access the main screen of the device without saving the configuration values.
7�3�- INSTALLED DEVICES
The type of device are configured in this screen,
Figure 61
.
Figure 61: Configuration screen: Installed units
● Type of device: Master / Single / Slave
In this screen the type of device is selected, the possible options are:

Single: select this option if the SVGm does not have static generators connected in parallel.

Master: select this option if the static generator is going to be used as the “ master ” of a
group of devices in parallel.

Slave: select this option if the device is going to be used as the “ slave ” of a group of devices
in parallel.
Once the device has been configured as the “ slave ”, the next configuration step is shown in
section “
6.10.- ETHERNET COMMUNICATIONS
”.
Note: The and / keys are disabled in the slave devices.
Press the key to access the next configuration step
Press the key to access the main screen of the device without saving the configuration values.