SERVICE MANUAL
–
Post eVolve Smart
2 - RISKS PREVENTION
CIRCONTROL, S.A.
–
Innovació, 3
–
08232
–
Viladecavalls (Barcelona)
Tel.: +34 937 362 940
–
Fax: +34 937 362 941
6
Web: www.circontrol.com
–
E-mail:
2
RISKS PREVENTION
A safe work environment is not always enough to control all potential electrical hazards.
You must be very cautious and work safely. Safety rules help you control your and others
risk of injury or death from workplace hazards
1.
Avoid contact with energized electrical circuits.
2.
Disconnect the power source before servicing or repairing electrical equipment.
3.
Use only tools and equipment with non-conducting handles when working on
electrical devices.
4.
Never use metallic pencils or rulers, or wear rings or metal watchbands when
working with electrical equipment.
5.
When it is necessary to handle equipment that is plugged in, be sure hands are dry
and, when possible, wear nonconductive gloves, protective clothes and shoes with
insulated soles.
6.
If it is safe to do so, work with only one hand, keeping the other hand at your side or
in your pocket, away from all conductive material. This precaution reduces the
likelihood of accidents that result in current passing through the chest cavity.
7.
Enclose all electric contacts and conductors so that no one can accidentally come
into contact.
8.
Never handle electrical equipment when hands, feet, or body are wet or perspiring,
or when standing on a wet floor.
