SERVICE MANUAL
–
Post eVolve Smart
8 - OTHER DEVICES
CIRCONTROL, S.A.
–
Innovació, 3
–
08232
–
Viladecavalls (Barcelona)
Tel.: +34 937 362 940
–
Fax: +34 937 362 941
42
Web: www.circontrol.com
–
E-mail:
8.3.2
RFID LEGIC READER POWER SUPPLY (14) (OPTIONAL)
The RFID LEGIC reader power supply is a device that converts the 12Vdc
voltage to 5Vdc to power the RFID LEGIC reader.
-
Check output voltage at every Charge Point maintenance
of, in order to ensure that all devices will work properly.
-
RFID LEGIC READER device will not work properly if the
output of power supply is not at least 5V.
8.3.2.1
TECHNICAL CHARACTERISTICS
A table of technical specifications of the power supply is shown below:
8.3.2.2
WIRING CONNECTION
Following image shows a detailed scheme of the power supply connections. Please,
refer to “
” section for mor
e details.
-
Each wire connected to the power supply is labelled for identification.
Do not connect in reverse order; it could cause irreparable damage
on the Charge Point equipment.
+12
VDC
-12
VDC
+5
VDC
-5
VDC
VA3A0000088
VA3A0000089
G03.1
2
1
4
3
OUTPUT
INPUT
DC Voltage
5 V
Voltage range
9…36 VDC
Rated current
3 A
Current range
0….3 A
WEATHER CONDITIONS
Rated power
15 W
Working temperature
-
40…+85 ºC
Voltage adj. range
4.5-5.5 V
Working humidity
5…95%
