Circontrol Post eVolve Smart Series, Руководство по обслуживанию

Страница: 70 / 152

SERVICE MANUAL – Post eVolve Smart
10 - CHARGE POINT ADVANCED SETTINGS
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941 68
Web: www.circontrol.com – E-mail:
circontrol@circontrol.com
To change the Charge Point current rating, follow the steps below:
STEP ACTION
1
Set the IP address of the Charge Point.
IP address shall be previously assigned using IPSetup.
2 Select “Load management” at “General” menu .
3 Change the “Status” from disabled to enabled
4 Set the new current value to be applied at the Charge Point.
5 Make sure that “Shared Power” option is selected
6
Click the "Save ” button and wait until the process ends.
For further information please, refer to Charge Point Manager Instruction Manual.