Cineversum Force one, Руководство пользователя

Страница: 70 / 100

8.0 ADJUSTING THE IMAGE
70 R599790 - FORCE Series User Manual
of the projector can be controlled from this interface and the Virtual OSD can be accessed from here.
8.10 Alarm Conditions
An alarm condition consists of a message that is on the LCD display located beside the built-in keypad.
There are two types of alarm conditions:
• Warning Alarm
• Critical Alarm
A warning alarm is shown when an error or a non-optimal condition has occurred. That will generally not prevent the
projector from operating. An example is when a temperature is slightly elevated.
A critical alarm is shown when a condition occurs that could prevent the projector from operating and could cause
damage to the projector. This may cause the projector to shut down automatically. An example would be a fan not
running.
Both alarm types display:
• the item of alarm
• the status of the item
The item of the alarm can be either physical, i.e. fan or sensor, or the alarm can be a software issue, i.e. lamp driver.
The LCD displays the status of the item and its units; if applicable. If the status of the item is out of normal range an
alarm is created. When the status of the item is within normal range the alarm will clear.
NOTES:
1) When an alarm is displayed in the LCD display, the built-in keypad is disabled. To confirm the alarm, press the OK
soft key to enable the built-in keypad.
2) The alarm condition can also be viewed using the remote in the read only Status menu.
Example of Alarm Condition