Cineversum Force one, Руководство пользователя

Страница: 31 / 100

5.0 REMOTE CONTROL
R599790 - FORCE Series User Manual 31
The number in the “Enter Number” window indicates which projector is currently listening to commands, and will
match the projector number that has been defined in the Menu Preferences menu.
The PROJ check box (read-only) shows whether or not the projector physically connected to a keypad is listening to
commands from that keypad. A checkmark means that connected projector is listening; if there is no checkmark,
you are communicating with a different projector.
To control a specific projector with the keypad, press PROJ and then enter the three-digit number assigned to the
projector you want to use. If you switch to a projector other than the one you are currently using, the checkmark will
disappear.
To broadcast to multiple projectors, press PROJ and then PROJ again without entering a projector number. Keypad
commands will then effect all projectors present. NOTE: There is no method of controlling a group of projectors
within the same wired configuration using the wired keypad exclusively, since there is only one wired protocol
available.
NOTE: The projector’s address can be set in the Configuration Menu> Communications Submenu.
• Enter
Press ENTER to select a highlighted item, to toggle a check box, or to accept a parameter adjustment and return to
the previous menu or image.
• Exit
Press EXIT to return to the previous level, such as the previous menu. NOTE: EXIT does not save changes within
text editing boxes (including number editing of a slide bar value) or within pull-down lists. It acts as a “cancel” in
these cases.
• Arrow Keys
Use the LEFT/RIGHT ARROW KEY to change a slide bar value or to select a different option within a pull-down list
without having to first scroll through options or navigate within a menu, pull-down list or text box.
• Lens H and Lens V
When adjusting the image for focus, zoom or horizontal and vertical positioning, use the specific arrow keys (LEFT/
RIGHT ARROW KEY or UP/DOWN ARROW KEY) related to each function. A small window will appear to indicate
the type of adjustment taking place. For example,
• Use the FOCUS and the LEFT ARROW or RIGHT ARROW KEY to improve image clarity as desired.
• Use the ZOOM and the LEFT ARROW or RIGHT ARROW KEY to achieve a desired image size.
• Use the LENS H and the LEFT ARROW or RIGHT ARROW KEY to position the image horizontally.
• Use the LENS V and the UP ARROW or DOWN ARROW KEY to position the image vertically.
Press EXIT to return to a presentation level. NOTE: Use the LENS key (built-in keypad) with the general UP/ DOWN
ARROW KEY to get the same effect as if using the arrow keys related to “Lens V” or “Lens H” on the Remote
Keypad. All 4 lens settings can be adjusted by using the soft keys.
• Laser
Press LASER to activate the laser pointer on the remote. Point the remote at the screen to highlight an area of your
presentation.
Leave batteries in the wired remote keypad for the LASER key to work.