GE AC Instalation and operation manual V10.docx
32
/ 63
Standby
Ready
Run
Initialization,
Precharge
Interface
LCD/Modbus/Console
LCD
Configuration
Alarms, limits
Operation
Mode
PC
Console
Control
Interface
Parameters and
orders
Constant Voltage Mode
Parameters:
Freq
(x3) Vrms, φ, R_emulated grid (Fundamental)
(x33) U%, φ (Harmonics)
Faults Generation Mode
Alarms
Voltage dips
Parameters:
(x3) U% of each phase
(x3) φ of each phase
Over/Under Voltage
Parameters:
U% of all phases
Freq Variations
Parameters:
Final Freq of all phases
Flicker
Parameters:
U% Voltage envelope amplitude
Freq of voltage envelope
Harmonic Sequence
Parameters:
--
Soft.
Trigger
Parameters according to interface
LCD
Interface selector
: Modbus by default
Alarms
: Display and Reset
Control
: Reset, Rearm, Enable, Run
Parameters
:
-Constant voltage mode:
Freq, (x3) Vrms, φ, Req (Fundam.)
-Faults generation mode:
Soft. Trigger
PC
All of them excepting the interface selector
Console
Analog inputs:
x3 voltages (ph-n)
General:
Vbusmax
Vbusmin
Comms
OverTemp
AR:
Vmax
INPUT
Vmin
INPUT
(disconnection)
Imax
INPUT
Precharge
OverLoad
INPUT
PR Limit
INV:
Imax
OUTPUT
(OverCurrent)
Short circuit
Limit PR
OverLoad
OUTPUT
General Parameters:
Input ramp (V/ms) - (Hz/s)
Output ramp (V/ms) - (Hz/s)
Application time (ms)
β Angle of fault application with respect to
phase R
