manualshive.com logo in svg

Ciena 170-3930-900, Руководство по установке и запуску оборудования

Поделиться
Скачать
Ciena 170-3930-900 Скачать руководство пользователя страница 20

2-4

   Installation

3930 Service Delivery Switch

Hardware Installation and Start-up Manual

009-3223-001   Standard    Revision E

Copyright

©

 2012-2014 Ciena

®

 Corporation

January 2014

Note:  

Cabling and wiring that is part or the same physical installation, 

even if it exits the building or enclosure for a short distance, should 
generally be classified as intra-building.

Mounting the Device

The following installation options are available:

•

Wall Mount

•

Rack installation (19-inch frame or 23-inch frame)

Before you start, ensure that the frame or mounting surface (wall mount 
installations) is capable of supporting the weight of the system, SFPs and 
cabling.

Wall Mount Installation

The wall mounting brackets are attached to the chassis, so that the chassis 
can be mounted on a wall or other vertical surface. The wall mount bracket 
does not contain any cable management features. See 

“Installing the 

Wallmount Bracket” on page 8-6

 for more information. 

Note:  

For installations using the wallmount bracket, the hardware 

required to attach the mounting bracket to the wall is Customer supplied. 
In addition, the reinforced mounting surface should be capable of 
supporting approximately 100 pounds. Please ensure that the hardware 
used includes the proper fasteners/anchors required to support the weight 
of the unit.

See 

“To Install 3930 on a Wall” on page 2-16

 for a high level procedure.

Frame Installation

The frame mount brackets are also compatible with cable support brackets 
that are designed to keep cables out of adjacent equipment space. Mounting 
brackets are available to fit 19-inch and 23-inch equipment frames.

See 

“To Install 3930 in a Frame” on page 2-17

 for a high level procedure.

WARNING: 

When installing the unit, ensure that the wiring meets the local and 

national electrical codes.

 

WARNING: 

All electrical interfaces on this product are intended for intra-building 

connections only. These interfaces are designed as type 2 or type 4 ports as 
described in GR-1089-CORE, Issue 6 and require isolation from the exposed outside 
plant cabling.

Содержание 170-3930-900









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды