9
12/03/12
Connecting the boiler to the chimney and boiler room ventilation.
Picture 6- Chminey connection:
Chimney should be made in accordance with applicable regulations. The under pressure in the
chimney should be maintained at the level recommended in the table. The manufacturer
recommends the use of chimney systems resistant to penetration of condensate. The chimney should
be made of acid-resistant materials and be warmed throughout. Allowed brick chimneys provided a
good thermal insulation of the chimney.
Section of the flue from the boiler to the chimney flue should have called a slight raising in the
direction of the chimney. To reduce the flow resistance of the exhaust section should be run in a
straight line and the possible change of direction made with gentle curves (elbows). At the bottom
of the stack of about 30 cm from the floor should be cleaning hole.
The manufacturer also requires the drought pressure regulator assembly and the
damper on the chimney anti explosion .