2
12/03/12
1. Admission.
Thank you for the trust You have given the company. for purchasing our burner and we hope that it
will be a long and safe to serve You as a cheap and reliable source of heat. Range of burners
“MOC” is recommended for users looking for automated solutions in the combustion of biomass -
pellet.
2. Purpose burners „MOC”
“MOC” burners 15-60kW burning wood granules (pellets) are the optimal devices designed for use
with solid fuel boilers with outputs ranging from 15 to 60 kW. “MOC” burners are designed so that
its use during operation and maintenance costs were relatively low. With a horizontal furnace
burner can be mounted in many boilers for solid fuel without major modifications to these devices.
With the pellet’s burner using comfort we get closer to the oil boilers.
All work on the boiler equipment, the mounting position of the burner and its operation must
be performed in accordance with applicable standards and regulations !
Required fuel:
Wood pellet 6-8mm cross section , length 5-30mm, ash content max. 2%.
The maximum moisture content of pellets should not exceed more then 10%.
The calorific value of the pellets should be greater than 17,5 MJ/kg.
Pellets made in accordance with Standard:
•
ÖNORM (M7135) or DIN-Norm (DIN-Norm 51 731).
•
Cross section: 6-8 mm, length: 5–30 mm
•
Max. Ash content 2%
•
Calorific value > 17,5 MJ/kg
3. Design and technical specification.
The construction enables the exchange of components that are subject to rapid wear without having
to replace the entire burner, which significantly reduces equipment maintenance costs. The burner
has an automatic ignition system of fuel and flame control.
Fuel is delivered by the feeding screw, which is combined with the flexible wire burner. Additional
feeder (called “Stoker”) inside the burner provide the correct dosage of fuel into the combustion
chamber and protects the flash fire back into the pellets storage.
The burner in the boiler (depending on its design) is achieved efficiencies of up to 92%.